$79.99 + Tax

28 in stock


Xtreme Solutions’ Graphene Ceramic Coating is a clear, nano-crystalline ceramic coating that protects automobile substrates from weather, chemicals, physical abrasion and UV rays while repelling water, dirt and other contaminants via a self cleaning effect. Xtreme’s Graphene Ceramic Coating applies an ultra hard, inert, durable coating that
is several micron thick and imparts a deep, reflective shine.

Shake well before use. Saturate a suede applicator or similar applicator with numerous drops of material from the dabber bottle. Apply the coating to a 3×3 ft² area of the vehicle using a cross-hatch pattern with slight overlap to level the product. Allow the coating to cure for 5-10 minutes and gently remove excess product using a clean suede cloth or low nap microfiber towel. Do NOT allow coating to come in contact with water for 48 hours while curing – if it does, remove water promptly. Apply additional coats with at least one hour between applications. Do NOT apply in direct sunlight or to a hot surface. Cure time is dependent on environmental conditions – test product on a small inconspicuous area first to gauge cure time.

  • Up to 5 Years of Durability
  • Low Friction and Low Sliding Angle with High Contact Angle – Dynamic Hydrophobicity
  • Less Prone to Water Spots  and Stains from Bird Droppings and Decreases Penetration
  • Stronger, More Stable, Lower Energy Bonds Impart Higher Detergent Resistance
  • Increased Tensile Strength Improves Scratch & Mar Resistance Well Beyond 9H
  • Easier Application – Less Tacky During Install
  • Rainbow Streaks & Sweats During Dwell – Communicates When to Wipe Off
  • More Immediately Slick Post Install
  • Higher Gloss with Higher Activity – Mirror-like Reflectivity
  • Lower Odor / Less Harsh
  • Micro-suede applicator included!


Physical State: Liquid
Appearance: Clear, Black
Odor: Characteristic
Flash Point: 49°C / 121°F
pH: N/A
Specific Gravity: 1.053 g/cm3
Density: 7.92 lbs/gal
Longevity: Up to 5 Years
Hardness: >9H (ASTM D-3363)
Contact Angle: 105-115° (Clear Coat)
Sliding Angle: 5-15° (Clear Coat)

Thickness: 3-4 micron
Adhesion: 5B – No Coating Loss (ASTM D-3359)
Mandrel Bend: No Coating Loss @ 180° (ASTM D-522)
Impact: 80/80 inch-lbs (ASTM D-2794)
Temperature Resistance: 1200-1800°C / 2200-3300°F


Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Wear protective gloves/eye protection/face protection. Precautionary statements – response IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. IF ON SKIN: Wash with plenty of water. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Specific treatment (see on this label). Rinse mouth. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. In case of fire: Use sand, carbon dioxide or powder extinguisher to extinguish. Precautionary statements – storage Store in a well-ventilated place. Keep cool. Store locked up. Precautionary statements – disposal Dispose of contents/container in accordance with local/regional/national/international regulations. This product contains octamethylcyclotetrasiloxane and organic polysilazane compound


SKU: 92GRAPHENE Categories: ,