$13.49 + Tax



Better Edge rotary application buffing pads are a perfect solution for detailers looking for a soft edge finish on pads. These custom pads feature a counter edge that allows the pad to easily reach contours and edges. Our Better Edge Buffing Pads range from aggressive cut to final finish grade.

Available In:

  • Black – Heavy Cut (Not Available at this time)
  • Yellow – Medium Cut
  • Green – Light Cut
  • Blue – Polish
  • White – Finish (Advanced Special Orders Only*)
  • Grey – Ultra Finish (Advanced Special Orders Only*)


*Advanced Special Orders may require an additional 10 business days to ship.


Cleaning your pads:

Cleaning your pads:

Wool/Acrylic/50-50 Pads:

When cleaning a wool pad on the fly during a rotary buffing process, a pad spur is the tool of choice. Start by bracing the tool against your lower leg, or by bracing the handle (if you use one) against your leg. With the tool on a moderate speed setting, bring the spur in contact with the pad on the area spinning away from you. With the tool switched on at a moderate speed the spur is moved across the face of the pad but only on the side that is spinning away from you. Should you lose control of the spur at this point it will merely be flung to the floor: doing so on the other side of the pad could throw the spur into the air and directly into your face. When finished spurring the fibers of the pad are no longer matted, and spent product/paint has been expelled. You can now continue buffing efficiently and effectively. Compressed air can also be used to clean excess, dried product from a wool pad, as can a pad washer. The pad washer is an excellent way to finish the day when using wool pads. Any slight amount of product left behind can then be cleared out with a spur (as above) or with compressed air before beginning a new project later on.

Foam Pads:

The same excess product and spent paint can collect on foam pads, quickly building up and drying on the face of the pad. A pad conditioning brush is best for cleaning foam pads on the fly, and the basic process is essentially the same as with the wool pads described above. With the tool braced against your leg, switch the tool on at moderate speed and move the brush across the face only on the side spinning away from you. Excess product/paint is removed but the pad remains essentially “primed” and you can continue buffing. Another option for the above is to use a terry cloth towel wrapped around the index finger of one hand while holding the tool with the other. Use exactly as described above so that the tool spins the pad away from your finger rather than towards it.

Additional information


Black/Heavy Cut, Yellow/Medium Cut, Green/Light Cut, Blue/Polish, White/Finish, Grey/Ultra Finish


There are no reviews yet.

Be the first to review “BETTER EDGE FOAM PADS”